Belt Width:
Belt Length:
Distance from Charge End to End of Hot Zone:
Distance from Center to Center of Drums:
Drive Location
Method of Belt Support:
Dia of Drive Drum: (maximum allowed)
Dia of Tail Drum (maximum allowed)
Spacing of Support Rollers:
Dia of Rollers:
Load (lbs per Sq. Ft).
Belt Speed (feet per Minute)
Maximum Temperature
(specify Celcius or Farenheit):
Product being conveyed:
Product Size: 
If the belt will be on an incline (please specify degree of Incline):
Is the Load:
Company Name:  
Street Address:
City, State, Zip:
Contact Name:
Email Address:
Fax Number:
Phone Number:
If you would like Audubon to recommend a belt best suited for your application, please fill in the form.  All information will be held strictly confidential.  Our enginneering department will be back to you with a recommendation and price quotation.  Audubon manufactures wire mesh conveyor belts only.  Our engineers do not design, nor are they in the position to recommend a complete conveyor system.   Please have all the information requested below readily available so we can make the proper recommendation for an Audubon Conveyor Belt.
AUDUBON Sales & Service
"Conveyor Belt Manufacturer Since 1884"
850 Pennsylvania Blvd.
Feasterville, PA  19053   
PH:  (800) 523-0169 (toll free in u.s.)
PH:  (215) 364-5451
FX:   (215) 364-5538

All fields below are required
Additional Comments:
If you prefer a certain 'style' metal mesh conveyor belt in the recommendation check below: otherwise Audubon will recommend a CHAINWEAVE conveyor belt for your application:
Required Field: We must have minimum product size to determine the proper mesh opening to contain your smallest product size.
Type of Wire Mesh Conveyor Belt Drive:

Required Field.  Above applies only to friction or pressure roll drives. If this does not apply put N/A.
Please specify unit of measurement  (feet, inches, mm etc)
Required Field. If this is Not Applicable, please put N/A in field 
Is there an atmosphere in the furnace?
If yes please describe the belt and/or specification and also the problem you are having with your existing conveyor belt specification:. Put N/A if this is a new application
If Yes Advise details
Your Contact Information:
Required Field.  Above applies only to friction or pressure roll drives. If this does not apply put N/A
Required Field. If no temperature involved please put AMBIENT in this field.
Required Field above. If does not apply please put N/A.

Are you replacing an existing conveyor Belt?
Please specify unit of measurement  (feet, inches, mm etc)
Please specify unit of measurement  (feet, inches, mm etc)
Is this a New Application?
Charge End
Discharge End
Please recommend
Pressure Roll
Chain Weave Conveyor Belt, Positive Drive
Friction Drive Wire Mesh Conveyor Belt
Positive Drive Wire Mesh Belt with Segment Roll